Choose the boot device as a UEFI device if offered, on first screen press Shift + F10 to open a Command Prompt, type the following commands, each followed by Enter key: DISKPART. LIST DISK. SEL DIS # (replace # with the disk # of the Windows disk from list in previous command) CLEAN. EXIT. 3. Insert the USB flash drive into a USB port on your Ideapad 330 and power on the device. 4. Press the F12 key when the Lenovo logo appears on the screen. This will enter the boot menu. 5. Use the arrow keys to select the USB flash drive from the boot menu and press the Enter key. 6. Dowiedz się, jak wybrać urządzenie rozruchowe, skonfigurować kolejność rozruchu i aktywować menu rozruchu na ideapad , ThinkPad , ThinkStation , ThinkCentre i ideacentre . Lenovo OneKey Recovery system or the BIOS setup utility, or to enter the boot menu. c Ventilation slots Dissipate internal heat. Note: Make sure that none of the ventilation sl ots are blocked, or else overheating of the computer may occur. d VGA port Connects to external display devices. e RJ-45 port Connects the computer to an Ethernet network. Posted: Feb 26, 2021. Options. Enter into boot menu by pressing the F2 key when turning on ur laptop. Go to the boot section and in there If UEFI option is the one enabled using the arrow up and down keys change it to Legacy boot after doing that save ur changes before exiting. That should do the trick. I solved this by following the steps below (copied from the linked article) exactly. Press the recovery button next to the HDD light. In configuration, turn off Secure boot, select Reset to Setup Mode. Press F10 to save and exit. Turn off the machine again, press the recovery button. Step-by-step steps to make a boot disk in MCT. Prepare a flash driver with at least 8GB (Pay attention to backup data, because creating a boot disk will erase all data of the flash driver). Then operate it on another Windows computer. Visit Download Windows 10 (microsoft.com) and click "Download Now" to download MCT (Media Creation Tool). Key Takeaways. Easily enter the BIOS (UEFI) on your Windows 11 PC by pressing a key like F2 or Delete during startup or restart through the Recovery page in Settings. You can access the BIOS using Windows Terminal by typing a specific command in PowerShell or Command Prompt and navigating through the Troubleshoot menu in the "Choose an Option dJ51UI.

lenovo ideapad 100 boot menu